Reznor R6GP Option - Installation - Bottom Power Entry Uživatelský manuál stáhnout pdf

This kit is designed to allow passage of high and low

voltage wiring connections through the unit bottom

pan on R6GP Series units.

WARNING:

This kit is to be installed by a qualiﬁ ed service

technician in accordance with these instructions

and all codes having jurisdiction. Failure to follow

these instructions could result in serious injury,

property damage, or death.

WARNING:

All electrical wiring must comply with the latest

edition of the National Electrical Code ANSI/

NFPA 70.

These instructions are primarily intended to assist

qualified individuals experienced in the proper

installation of this appliance. Some local codes require

licensed installation/service personnel for this type of

equipment.

This Kit Includes:

1) Parts kit:

a. 3/4” diameter, FMC straight connectors (2 ea.)

b. 3/4” diameter, insulator sleeve (2 ea.)

c. 3/4” diameter, insulator bushing (2 ea.)

d. 3/4” diameter, FMC (48” long)

e. 1-1/4” diameter, FMC straight connectors (2 ea.)

f. 1-1/4” diameter, insulator sleeve (2 ea.)

g. 1-1/4” diameter, insulator bushing

h. 1-1/4” diameter, FMC (24” long)

2) Bottom Power entry electrical box assembly

3) Bottom Power entry electrical box cover plate

4) 7/8” Diameter, plastic hole plug

5) 7/8” Diameter, plastic star bushing

6) ½” long #10 Screws (x ea.)

7) Zip-ties

8) Kit Instructions

Bottom Power Entry Kit

Installation Instructions

R6GP Model Series Accessory

Light Commercial Packaged Gas Electric Units

Field Supplied Items list:

1) Thread Sealant

2) Unit Disconnect

3) All conduit necessary for connections external to

the unit

Prior to beginning Installation, ensure the follow

conditions are met:

1) Read and understand the instructions for all

accessory kits to be installed with the unit and the

unit installation instructions

2) Unit is installed on roof-curb

3) No electrical power is connected to unit

4) Verify that input power supply is correct, verify with

unit rating label

5) Branch circuit protection to be used for unit is sized

in accordance with all applicable codes and unit

requirements

6) Perform all electrical set-up inspections called for

in unit Installation instructions

7) Verify kit contents to inventory list above

8) Verify all ﬁ eld supplied items are on-hand for

installation

1 2 3 4 5 6 7 8

Shrnutí obsahu

Strany 1 - Installation Instructions

This kit is designed to allow passage of high and low voltage wiring connections through the unit bottom pan on R6GP Series units. WARNING:This kit is

Strany 2

Strany 3 - Figure 3

3Installation Instructions:1. Remove unit control panel, blower access door and ﬁ eld-wiring, electrical element access door are removed. (Refer to

Strany 4 - Figure 7

47. On the left side of the unit control panel, behind the low-voltage connection box, remove the 1” diameter Heyco bushing from the base of the cont

Strany 5 - Figure 9

513. Install the threaded insulator bushings onto both of the high voltage wiring conduits in the bottom power entry box and in the unit control panel

Strany 6 - Figure 15. Bottom Power Kit

6HIGH VOLTAGE CONNECTIONSFOR UNIT CONTROL PANELHIGH VOLTAGE ACCESSFOR UNIT DISCONNECTBOTTOM POWER ENTRYBOX MOUNTING SCREWS(BOTH SIDES)LOW VOLTAGECONNE

Strany 7 - Figure 17. Side View

7Figure 17. Side ViewLOW VOLTAGEKNOCK-OUTS7/8” x 27 1/2”6”3 3/8”10”14 1/2”HIGH VOLTAGE KNOCK-OUTS7/8” x 22” RADIUSLOW VOLTAGEENTRY AREAHIGH VOLTAGEENT

Strany 8 - ¢708978k¤

¢708978k¤70897807089780Speciﬁ cations and illustrations subject to change without notice and without incurring obligations. Printed in U.S.A. (03/0

Komentáře k této Příručce

Žádné komentáře

Reznor R6GP Option - Installation - Bottom Power Entry Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Radiátory Reznor R6GP Option - Installation - Bottom Power Entry. Reznor R6GP Option - Installation - Bottom Power Entry User Manual [en] [pl] [cs] [de] Uživatelská příručka

Shrnutí obsahu

Komentáře k této Příručce

Související produkty a manuály pro Radiátory Reznor R6GP Option - Installation - Bottom Power Entry